Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis
SKF single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.
The SKF standard assortment of double row angular contact ball bearings includes:
| skf 6306 |
| skf thrust bearing |
| skf 6000 |
| skf 6308 |
| skf linear bearings |
| skf 6003 |
| skf 6309 |
| skf 6210 |
| skf 6304 |
| 6316 c3 |
| skf 6008 |
| skf pillow block bearing |
| 6319 c3 |
| skf cylindrical roller bearing |
| carb bearing |
| skf 6303 |
| skf 6007 |
| skf 6310 |
| 6314 c3 |
| skf 6307 |
| skf tih 030m |
| skf 6209 |
| skf 6302 |
| skf 6200 |
| 2rsh |
| skf ceiling fan bearing price |
| 6309 c3 |
| skf plummer block |
| 6204 2rs skf |
| skf 6212 |
| skf needle roller bearing |
- bearings in the 32 A and 3
- 3 A series
- bearings in the 33 D series
- capped bearings
- open bearings (that are also available capped) that may have recesses in the ring side faces
Bearings in the 52 and 53 series are no longer available and have been replaced with 32 A and 33 A series bearings, which are dimensionally interchangeable. Only size 3200 A is different, and has a width of 14 mm instead of 14,3 mm.
